resttrip.blogg.se - Dm1 dynamite

Note: For optimum results, it is recommended to plug the DM1 directly into the output of the microphone. The DM1's output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz, and hum. What's more, thanks to its dedicated output buffer amplifier, the gain boost it delivers is always a consistent 28dB regardless of the connected load. With its state-of-the-art Class A circuit and hand-selected high-grade FETs, the DM1 boasts the lowest self-noise in its class. SE Electronics DM1 Dynamite 1-channel Active Inline PreampĪctive In-line Preamp for Passive Dynamic and Ribbon Mics with 28dB of Gain Slim design allows for easy deployment onstage or in the studio.High-quality finish ensures a great look for many years.Slim, roadworthy all-metal housing with premium finish provides efficient rejection of electrical interference and noise.Gold-plated XLR connector for loss-free and reliable signal connection.Extremely low output impedance drives long cable runs and reduces susceptibility to RF interference, buzz, and hum.Dedicated output buffer amplifier provides 28dB output, independent of load impedance or cable length.Transformerless design for pristine sound quality.State-of-the-art Class A electronics and high-grade FETs provide supremely class-leading low noise.Provides significantly improved level to your mic preamp for proper gain staging.Gain stays consistent regardless of connected load.

The perfect way to boost the signal of a passive microphone.

Designed for neutral, balanced sound quality.

Provides 28dB of clean, consistent gain.

Not for use with phantom-powered microphones (condenser microphones, active ribbon mics).

Requires passive microphone (ribbon/dynamic) and 48V phantom power.

If necessary, a cable can be used between the microphone and the DM1 - but the shorter the cable, the better the overall performance will be. Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.įor optimum results, we recommend you plug the DM1 directly into your microphone's output. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum. The DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp - all without adding noise or coloration. Additionally, the gain it provides is always a consistent 28dB regardless of the connected load, thanks to its dedicated buffer amplifier. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones.

Some mics need a LOT of gain - and not all preamps are up to the challenge. Buy inline preamps like this and others like it, online from Singapore The sE Electronics DM1 Dynamite is an active inline preamp designed to provide +28 dB. The DM1 Dynamite: explosive level for all your passive mics